Sogen Energy

    Collection

    Latest Products

    Latest Products

    Showing 4 products

    Suntree 2 in - 2 out PV Combiner boxSuntree 2 in - 2 out PV Combiner box

    Suntree 2 in - 2 out PV Combiner box

    Suntree SHLX-PV2/2 DC Combiner Box — 1000V, 2 Strings In / 2 Out A compact, factory-wired DC combiner for single-string solar arrays where you still want proper overcurrent, isolation and surge protection between the panels and the inverter or charge controller. Everything's already wired at the factory, so installation is a matter of mounting the box, landing your PV positive and negative in, and running the output through to your MPPT controller. No internal assembly, no loose components, no guesswork. Inside you get double-pole fusing (one 1100V SRD-30 fuse on each pole, rated 20A), a 2-pole 1000V DC MCB rated 32A for load-break isolation, and a Type 2 DC surge protective device rated 20–40kA to clamp lightning-induced transients before they reach your inverter. That combination covers the three things that actually kill DC-side gear: overcurrent, arcing during disconnection, and surge. The IP65 enclosure is rated for outdoor mounting, so it can live on the array frame, a pole, or an exterior wall without needing its own weatherproof housing. Compact footprint makes it a good fit for tiny homes, cabins, sheds, campervan-scale ground arrays and any small off-grid setup. Specifications Model SHLX-PV2/2 Configuration 2 strings in, 2 strings out Max system voltage 1000V DC DC fuse SRD-30, 1P, 1100V, 20A (×2) DC breaker SL7N-63, 2P, 1000V, 32A Surge protection SUP2H-PV, 2P, 1000V, Type 2, 20–40kA Ingress protection IP65 Mounting Indoor or outdoor Wiring Pre-wired from factory

    $299.00NZD
    Suntree 3-1 Combiner boxSuntree 3-1 Combiner box

    Suntree 3-1 Combiner box

    Suntree SHLX-PV3/1 DC Combiner Box — 500V, 3 Strings In / 1 Out A compact, factory-wired DC combiner for single-string solar arrays where you still want proper overcurrent, isolation and surge protection between the panels and the inverter or charge controller. Everything's already wired at the factory, so installation is a matter of mounting the box, landing your PV positive and negative in, and running the output through to your MPPT controller. No internal assembly, no loose components, no guesswork. Inside you get double-pole fusing (one 1100V SRD-30 fuse on each pole, rated 20A), a 2-pole 1000V DC MCB rated 32A for load-break isolation, and a Type 2 DC surge protective device rated 20–40kA to clamp lightning-induced transients before they reach your inverter. That combination covers the three things that actually kill DC-side gear: overcurrent, arcing during disconnection, and surge. The IP65 enclosure is rated for outdoor mounting, so it can live on the array frame, a pole, or an exterior wall without needing its own weatherproof housing. Compact footprint makes it a good fit for tiny homes, cabins, sheds, campervan-scale ground arrays and any small off-grid setup. Specifications Model SHLX-PV3/1 Configuration 3 strings in, 1 string out Max system voltage 1000V DC DC fuse SRD-30, 1P, 1100V, 20A (×2) DC breaker SL7N-63, 2P, 1000V, 32A Surge protection SUP2H-PV, 2P, 1000V, Type 2, 20–40kA Ingress protection IP65 Mounting Indoor or outdoor Wiring Pre-wired from factory

    $230.00NZD
    Suntree 2-1 Combiner boxSuntree 2-1 Combiner box

    Suntree 2-1 Combiner box

    Suntree SHLX-PV2/1 DC Combiner Box — 500V, 2 Strings In / 1 Out A compact, factory-wired DC combiner for single-string solar arrays where you still want proper overcurrent, isolation and surge protection between the panels and the inverter or charge controller. Everything's already wired at the factory, so installation is a matter of mounting the box, landing your PV positive and negative in, and running the output through to your inverter. No internal assembly, no loose components, no guesswork. Inside you get double-pole fusing (one 1100V SRD-30 fuse on each pole, rated 20A), a 2-pole 500V DC MCB rated 32A for load-break isolation, and a Type 2 DC surge protective device rated 20–40kA to clamp lightning-induced transients before they reach your inverter. That combination covers the three things that actually kill DC-side gear: overcurrent, arcing during disconnection, and surge. The IP65 enclosure is rated for outdoor mounting, so it can live on the array frame, a pole, or an exterior wall without needing its own weatherproof housing. Compact footprint makes it a good fit for tiny homes, cabins, sheds, campervan-scale ground arrays and any small off-grid setup. Specifications Model SHLX-PV2/1 Configuration 2 strings in, 1 string out Max system voltage 500V DC DC fuse SRD-30, 1P, 1100V, 20A (×2) DC breaker SL7N-63, 2P, 1000V, 32A Surge protection SUP2H-PV, 2P, 1000V, Type 2, 20–40kA Ingress protection IP65 Mounting Indoor or outdoor Wiring Pre-wired from factory

    $230.00NZD
    Suntree 1-1 Combiner boxSuntree 1-1 Combiner box

    Suntree 1-1 Combiner box

    Suntree SHLX-PV1/1 DC Combiner Box — 500V, 1 String In / 1 Out A compact, factory-wired DC combiner for single-string solar arrays where you still want proper overcurrent, isolation and surge protection between the panels and the inverter or charge controller. Everything's already wired at the factory, so installation is a matter of mounting the box, landing your PV positive and negative in, and running the output through to your inverter. No internal assembly, no loose components, no guesswork. Inside you get double-pole fusing (one 1100V SRD-30 fuse on each pole, rated 6–30A), a 2-pole 500V DC MCB rated 16–63A for load-break isolation, and a Type 2 DC surge protective device rated 20–40kA to clamp lightning-induced transients before they reach your inverter. That combination covers the three things that actually kill DC-side gear: overcurrent, arcing during disconnection, and surge. The IP65 enclosure is rated for outdoor mounting, so it can live on the array frame, a pole, or an exterior wall without needing its own weatherproof housing. Compact footprint makes it a good fit for tiny homes, cabins, sheds, campervan-scale ground arrays and any small off-grid setup. Specifications Model SHLX-PV1/1 Configuration 1 string in, 1 string out Max system voltage 500V DC DC fuse SRD-30, 1P, 1100V, 20A (×2) DC breaker SL7N-63, 2P, 500V, 32A Surge protection SUP2H-PV, 2P, 500V, Type 2, 20–40kA Ingress protection IP65 Mounting Indoor or outdoor Wiring Pre-wired from factory

    $207.00NZD
    Latest Products | Sogen Energy