Collection

48V Lithum Battery Bundles

Showing 8 products

SOK Cabinet with 6 x SK48V100N Batteries

SOK 48V 100Ah Server Rack Battery Bundle — 6 x SK48V100N with Cabinet, Busbar & Cables Complete 30kWh Lithium Storage System for Off-Grid Homes & Hybrid Systems Datasheet Installation Instructions This bundle gives you a complete, ready-to-rack 30kWh lithium storage system — six SOK SK48V100N 51.2V 100Ah rack batteries, a powder-coated steel cabinet, busbar, and battery-to-busbar cables. Everything you need to get a serious battery bank installed without hunting down compatible hardware separately. If you're building out a hybrid or off-grid house system with Victron, Deye, Sol-Ark, Growatt, SMA, Schneider, LuxPower, Sunsynk, or pretty much any of the common stacked-battery inverters, these units are designed to slot straight in — and the cabinet keeps it all tidy, safe, and installation-ready from day one. Built-in self-heating handles cold weather automatically, so frosty Central Otago mornings or alpine installs don't shut the battery out of the charging window like they would with a standard rack battery. The powder-coated steel cabinet is built to last — not a flimsy afterthought — and with the busbar and cables included, your installer can get straight to work without waiting on extra parts. What sets the SK48V100N apart is the smart side of the design. The BMS supports Bluetooth OTA firmware upgrades — so when SOK releases an improvement or adds a new inverter protocol, you update from your phone instead of pulling batteries out of the rack. The inverter protocol itself is selectable via Bluetooth, with support for both CAN and RS485 communication across an extensive brand list — Victron, SMA, SOFAR, Studer Innotec, Voltronic, RCT, MPP, Alphaoutback, PYLON, Sol-Ark, Solis, Goodwe, Deye, Growatt, SAJ, Megarevo, INVT, Sermatec, TBB, MUST, Sunsynk, SRNE, Schneider, and LuxPower. One SKU works across the major brands — and crucially, if you change inverters down the track, your batteries come with you. There's also a 100,000µF pre-charge circuit built in to prevent BMS damage during inverter start-up. Automatic master/slave assignment handles multi-unit configuration without you needing to set DIP switches or assign addresses manually — just rack them up and they sort themselves out. Custom-molded M8 terminals accept wiring from multiple directions for clean rack installs, there's a physical on/off switch for safe servicing, and the 19" steel enclosure is built for proper rack-mount installations. SOK has been one of the most trusted names in the global off-grid community for years, with a reputation built on transparency, build quality, and batteries that actually do what the spec sheet says. We import direct from the factory and back every unit with a 10-year warranty. If you want a complete 30kWh lithium system that's properly thought through — not just rebadged generic hardware thrown in a box — this is it. What's in the Bundle 6 x SOK SK48V100N 51.2V 100Ah rack batteries (30kWh total) Powder-coated steel rack cabinet Busbar Battery-to-busbar cables Key Features 30kWh total system capacity (6 x 5120Wh) 51.2V 100Ah per unit — compact 3U rack-mount design (486 × 431 × 133mm, 45.5kg each) Internal self-heating with automatic low-temperature charge protection Bluetooth OTA firmware upgrades — no need to remove the battery Bluetooth-selectable inverter protocol — 25+ supported brands across CAN and RS485 100,000µF pre-charge circuit protects the BMS during inverter start-up Automatic master/slave assignment — no DIP switches or manual addressing Custom-molded M8 terminals for multi-direction wiring Genuine Grade A 100Ah prismatic LiFePO₄ cells SOK custom-designed Smart BMS Max continuous discharge: 300A per cabinet based on busbar dimensions Recommended charge current: 300A cabinet Physical ON/OFF switch SPCC+SGCC steel enclosure, IP20 rated Over-charge, over-discharge, over-current and short-circuit protection High and low temperature disconnects 10-year manufacturer-backed warranty Why Buy the Bundle Everything in one order — batteries, cabinet, busbar, and cables, no chasing parts Powder-coated steel lockable cabinet built for a permanent, professional install 30kWh in a single tidy rack system — serious capacity without the complexity 10-year warranty — longest in its class, real confidence from the manufacturer One SKU works across 25+ major inverter brands — futureproof if you change kit OTA upgrades mean the battery gets better over time, no service call needed Pre-charge circuit protects your investment from a common, expensive failure point Auto master/slave setup saves real install time on a six-battery bank Built-in heating keeps the system working through NZ winters Backed by SOK's reputation, not a no-name factory rebrand Note on Large Inverters: If you're running an inverter such as the Victron Quattro 8kVa or greater, that has capacitors larger than 100,000µF an external pre-charge resistor is required to protect the BMS on startup. Please contact us to we can supply the appropriate pre-charge resistor for your setup.

$13500.00NZD

SK48V100N Stackable Rack Bracket

Stackable rack bracket for the SOK 48V 100Ah rack battery.

$138.83NZD

SOK 10 Battery Cabinet with 5 x SK48V100N Lithium Batteries.

Includes: 1 x 10 Battery Cabinet 5 x SK48V100N Batteries 4 x Battery to Busbar cables Pre-Assembled Battery Cabinet | busbar & wheels & busbar cover included Constructed from heavy-duty steel Heavy-duty bus bars with protective covers Lockable front door and side panels A set of Cage Nuts screws Heavy Duty Casters Quick open side panel for easy maintenance. Only For SOK New 48V 100Ah server rack Battery,SK48V100N Cabinet Dimensions This cabinet can only be purchased with four or more SOK rack batteries or have purchased SOK rack batteries in the past. Image is for representation only.

$14990.48NZD

SOK 6 Battery Cabinet with 4 x SK48V100H Lithium Batteries.

SOK Battery Cabinet with 3 x SK48V100H Lithium Batteries Compact 3U Size – The smallest 3U size server rack mounted battery on the market. Bluetooth OTA Upgrade – Supports over-the-air firmware updates via Bluetooth. Bluetooth Inverter Protocol Selection – Users can switch inverter protocols via Bluetooth on the phone. Custom Terminals,M8 size– Proprietary self-designed terminals enable flexible wiring in multiple directions. Self-Heater Pad - Ideal for cold environements. Battery to Battery Communication Cable included. Battery to Busbar link cables included Pre-Charge Circuit to Prevent BMS Damage:100000µF Datasheet Installation Instructions Cabinet Dimensions Image is for representation only.

$11399.98NZD

SOK 6 Battery Cabinet with 3 x SK48V100H Lithium Batteries.

$9199.99NZD

SOK 6 Battery Cabinet with 2 x SK48V100H Lithium Batteries.

SOK Battery Cabinet with 2 x SK48V100H Lithium Batteries Compact 3U Size – The smallest 3U size server rack mounted battery on the market. Bluetooth OTA Upgrade – Supports over-the-air firmware updates via Bluetooth. Bluetooth Inverter Protocol Selection – Users can switch inverter protocols via Bluetooth on the phone. Custom Terminals,M8 size– Proprietary self-designed terminals enable flexible wiring in multiple directions. Self-Heater Pad - Ideal for cold environements. Battery to Battery Communication Cable included. Battery to Busbar link cables included Pre-Charge Circuit to Prevent BMS Damage:100000µF Datasheet Installation Instructions Cabinet Dimensions Image is for representation only.

$6999.99NZD

SOK Cabinet with 10 x SK48V100N Batteries

SOK 48V 100Ah Server Rack Battery Bundle — 10 x SK48V100N with Cabinet, Busbar & Cables Complete 50kWh Lithium Storage System for Off-Grid Homes & Hybrid Systems Datasheet Installation Instructions This bundle gives you a complete, ready-to-rack 50kWh lithium storage system — ten SOK SK48V100N 51.2V 100Ah rack batteries, a powder-coated steel cabinet, busbar, and battery-to-busbar cables. Everything you need to get a serious battery bank installed without hunting down compatible hardware separately. If you're building out a hybrid or off-grid house system with Victron, Deye, Sol-Ark, Growatt, SMA, Schneider, LuxPower, Sunsynk, or pretty much any of the common stacked-battery inverters, these units are designed to slot straight in — and the cabinet keeps it all tidy, safe, and installation-ready from day one. Built-in self-heating handles cold weather automatically, so frosty Central Otago mornings or alpine installs don't shut the battery out of the charging window like they would with a standard rack battery. The powder-coated steel cabinet is built to last — not a flimsy afterthought — and with the busbar and cables included, your installer can get straight to work without waiting on extra parts. What sets the SK48V100N apart is the smart side of the design. The BMS supports Bluetooth OTA firmware upgrades — so when SOK releases an improvement or adds a new inverter protocol, you update from your phone instead of pulling batteries out of the rack. The inverter protocol itself is selectable via Bluetooth, with support for both CAN and RS485 communication across an extensive brand list — Victron, SMA, SOFAR, Studer Innotec, Voltronic, RCT, MPP, Alphaoutback, PYLON, Sol-Ark, Solis, Goodwe, Deye, Growatt, SAJ, Megarevo, INVT, Sermatec, TBB, MUST, Sunsynk, SRNE, Schneider, and LuxPower. One SKU works across the major brands — and crucially, if you change inverters down the track, your batteries come with you. There's also a 100,000µF pre-charge circuit built in to prevent BMS damage during inverter start-up. Automatic master/slave assignment handles multi-unit configuration without you needing to set DIP switches or assign addresses manually — just rack them up and they sort themselves out. Custom-molded M8 terminals accept wiring from multiple directions for clean rack installs, there's a physical on/off switch for safe servicing, and the 19" steel enclosure is built for proper rack-mount installations. SOK has been one of the most trusted names in the global off-grid community for years, with a reputation built on transparency, build quality, and batteries that actually do what the spec sheet says. We import direct from the factory and back every unit with a 10-year warranty. If you want a complete 30kWh lithium system that's properly thought through — not just rebadged generic hardware thrown in a box — this is it. What's in the Bundle 10 x SOK SK48V100N 51.2V 100Ah rack batteries (50kWh total) Powder-coated steel rack cabinet 300A Busbars Battery-to-busbar cables Key Features 50kWh total system capacity (10 x 5120Wh) 51.2V 100Ah per unit — compact 3U rack-mount design (486 × 431 × 133mm, 45.5kg each) Internal self-heating with automatic low-temperature charge protection Bluetooth OTA firmware upgrades — no need to remove the battery Bluetooth-selectable inverter protocol — 25+ supported brands across CAN and RS485 100,000µF pre-charge circuit protects the BMS during inverter start-up Automatic master/slave assignment — no DIP switches or manual addressing Custom-molded M8 terminals for multi-direction wiring Genuine Grade A 100Ah prismatic LiFePO₄ cells SOK custom-designed Smart BMS Max continuous discharge: 300A per cabinet based on busbar dimensions Recommended charge current: 300A cabinet Physical ON/OFF switch SPCC+SGCC steel enclosure, IP20 rated Over-charge, over-discharge, over-current and short-circuit protection High and low temperature disconnects 10-year manufacturer-backed warranty Why Buy the Bundle Everything in one order — batteries, cabinet, busbar, and cables, no chasing parts Powder-coated steel lockable cabinet built for a permanent, professional install 50kWh in a single tidy rack system — serious capacity without the complexity 10-year warranty — longest in its class, real confidence from the manufacturer One SKU works across 25+ major inverter brands — futureproof if you change kit OTA upgrades mean the battery gets better over time, no service call needed Pre-charge circuit protects your investment from a common, expensive failure point Auto master/slave setup saves real install time on a six-battery bank Built-in heating keeps the system working through NZ winters Backed by SOK's reputation, not a no-name factory rebrand Note on Large Inverters: If you're running an inverter such as the Victron Quattro 8kVa or greater, that has capacitors larger than 100,000µF an external pre-charge resistor is required to protect the BMS on startup. Please contact us to we can supply the appropriate pre-charge resistor for your setup.

$23000.00NZD

Battery Cabinet for 10 x SOK 48V 100Ah Lithium Batteries.

Pre-Assembled Battery Cabinet | busbars & wheels.Constructed from heavy-duty steelHeavy-duty bus bars with protective coversLockable front door and side panelsA set of Cage Nuts screwsHeavy Duty CastersQuick open side panel for easy maintenance.Must be purchased with SOK New 48V 100Ah server rack Battery SK48V100N

$3400.00NZD