Tiny Home Off Grid Solar System NZ: What You Actually Need

    Most regrets with an off grid solar system in NZ don't come from bad gear. They come from buying a system off its headline numbers, then finding out in June it was never sized for winter. So before you compare kits, cabinets or anything else, work out what your place actually needs. Then judge every option against that one spec.

    Here's how to do it for a typical tiny home, in three steps.

    Step 1: How much power does a tiny home use in winter?

    Everything in an off grid system is sized from one number: how much energy you use in a day in winter. For each appliance, multiply its watts by the hours a day it runs, then add them up.

    Appliance Watts Hours a day Wh a day
    LED lights (6 at 7W) 42 5 210
    Efficient fridge (average draw) 45 24 1,080
    Laptop 60 6 360
    Router or Starlink 50 24 1,200
    Water pump 500 0.5 250
    Jug (a few boils) 2,200 0.2 440
    Inverter standby 20 24 480
    Total 4,020

    Add about 20% for inverter and battery losses and you're at roughly 4.8kWh a day. Look at where it goes: the router and the inverter just sitting there use more than the lights, laptop and pump put together, because they never switch off.

    This is a modest setup. Add a washing machine, an electric incinerating toilet or any electric heating and that number climbs fast, so do the sum with your own appliances. Our off grid solar and battery calculator does the adding up for you.

    Step 2: How much solar and battery do you need?

    Three parts do the heavy lifting in a tiny home solar system: the off grid battery, the panels and the off grid inverter. Each one is sized from your winter number.

    Battery. In mid-winter you can get several grey days in a row, so plan to ride through about two of them before the generator starts. At 4.8kWh a day that's around 9.6kWh you can actually use. With LiFePO4, that's roughly a 10kWh battery. With lead-acid or gel you should only use about half the rated capacity, so you'd need nearly 20kWh of it to do the same job.

    Solar. Much of NZ only gets the equivalent of 1.5 to 3 hours of full sun a day in June and July. Divide 4.8kWh by 2 hours, add 25% for real-world losses, and you need about 3kW of panels. That's around six to seven panels. Shaded sites and the deep south need more. Panels are the cheapest part of the system, so this isn't the place to save.

    Inverter. It has to run everything that could be on at once, plus the surge when a pump or fridge kicks in. A jug, the pump and the fridge together is about 3kW. Add a washing machine and you want 5kVA. Make sure it takes a generator input, because a generator for long cloudy spells is normal for full time living, not a sign the system's failed.

    So the spec for this tiny home is: about 10kWh of LiFePO4, about 3kW of solar, a 5kVA inverter with a generator input. Keep that written down. It's what you compare everything against.

    Step 3: Off grid solar kit, all-in-one or pre-wired cabinet?

    Once you know the spec, there are really three ways to build an off grid solar system for it. (Portable power stations drop out here. They're great for camping and power cuts, but at 1 to 3kWh they're not built to run a home through winter.)

    DIY off grid solar kit All-in-one unit, installed Pre-wired cabinet
    What you buy Panels, inverter, battery, some cable Inverter and battery stacked in one branded case, fitted by an installer Inverter, battery, solar charger, protection and monitoring built into one enclosure
    What's usually missing Breakers, isolators, fusing, earthing, mounting, an enclosure, monitoring Often a generator input or full off grid rating, as many are built for grid-tied homes Panels and mounts beyond any starter set
    Who designs it You The installer The builder, before it ships
    Electrician's job All the 230V wiring, plus checking your DC work if they'll sign it off The whole install Connecting the solar and the house
    Main risk The battery or inverter doesn't actually match the spec You're locked into one brand for expansion and repairs Paying for a bigger box than you need

    A DIY kit always looks cheapest on the price tag. By the time you've bought what it left out and paid an electrician to build and certify it on site, the gap usually closes, and you're the one who owns the design if it falls short in winter. In NZ any 230V wiring needs a licensed electrician and a Certificate of Compliance, and the homeowner exemption doesn't cover solar.

    That doesn't make kits a bad buy. If you're handy and it's a shed or a weekend place, a kit can be the right answer. The point is to compare every option against your spec, not against each other's price tags.

    Five checks before you buy an off grid solar system

    Whatever type you're looking at, run it through these before you hand over money.

    1. Usable battery, not rated battery. Ask how many kWh you can actually use. A "10kWh" lead-acid bank and a 10kWh LiFePO4 battery are very different things.
    2. Continuous and surge ratings, not the headline kW. Some packaged kits pair a big battery with an inverter that can really only run one big appliance at a time. Check both ratings against your load list.
    3. Winter solar. Ask what the panels will make on a short, overcast winter day at your site, and whether there's room to add more later.
    4. Who backs the warranty in NZ. Find out who you call in year three, whether they hold stock and spare parts here, and whether the warranty has strings attached, like the system having to stay online.
    5. Monitoring in your name. You want to see battery and solar on your phone, get alerted to faults, and keep access if the seller disappears.

    Where the Energy Hub Mini fits

    We built the Energy Hub Mini, our complete off grid solar system in one cabinet, for exactly this kind of tiny home, so here's how it lines up against the spec.

    Tiny home spec Energy Hub Mini
    Battery About 10kWh usable LiFePO4 10kWh SOK LiFePO4, 100% usable
    Solar About 3kW for winter Takes up to 6kW
    Inverter 5kVA with generator input 6kVA Victron Multi RS with generator auto start
    Monitoring On your phone, in your name Remote monitoring with an earth fault alarm

    It's pre-wired and tested before it leaves us, in an outdoor aluminium cabinet with the connections locked inside. Your electrician connects the solar, and the house just plugs in. For full time winter living in this example, you'd pair it with about 3kW of panels, with room to add more later. We have solar panel kits to suit, sized to your needs. Every part inside is standard Victron or SOK gear any solar electrician knows, so it can be serviced and added to rather than replaced. For bigger households, a 20kWh version is on the way.

    If your numbers come out very different, that's fine. Put them through the battery calculator and talk to us, and we'll tell you straight if a Mini is the wrong fit.

    Off grid solar FAQs

    How much solar do I need for a tiny home in NZ? For a modest tiny home using around 5kWh a day, about 3kW of panels covers most of NZ in winter. Shaded sites, the deep south or heavier use need more.

    What size battery does an off grid tiny home need? Enough to ride through about two grey days. For 5kWh a day that's around 10kWh of LiFePO4, or nearly double that in lead-acid, since you can only use about half of a lead battery.

    Can I install an off grid solar kit myself? You can do extra-low voltage DC work yourself if it meets the wiring and PV standards. Anything with 230V wiring needs a licensed electrician and a Certificate of Compliance, and the homeowner exemption doesn't cover solar.

    Do I still need a generator with off grid solar? For full time living in most of NZ, yes. A generator for long cloudy spells in winter is normal, so choose an inverter with a generator input and auto start.

    Still have questions?

    Not sure what size system you need? Give us a call.